Microscan MS-4X Manuel d'utilisateur télécharger pdf (Page 2)

2X M2x0.4

.16” (4.06 mm) depth

MS–4X IM a g e r Spec I f I c atI o n S an d optI o n S

MECHANICAL

Height: 1” (25.4 mm) Width: 1.80” (45.7 mm)

Depth: 2.10” (53.3 mm) Weight: 2 oz. (57 g)

ENVIRONMENTAL

Enclosure: IP54 (category 2)

Operating Temperature: 0° to 40° C (32° to 104° F)

Storage Temperature: -50° to 75° C (-58° to 167° F)

Humidity: up to 90% (non-condensing)

CE MARK

General Immunity for Light Industry:

EN 55024: 1998 ITE Immunity Standard

Radiated and Conducted Emissions of ITE

Equipment: EN 55022:98 ITE Disturbances

LIGHT SOURCE

Type: High output LEDs

LIGHT COLLECTION OPTIONS

Progressive scan, square pixel.

Software adjustable shutter speed,

electronic shutter

VGA: 640 by 480

SYMBOLOGY TYPES

2D Symbologies: Data Matrix (ECC 0-200),

QR Code, Micro QR Code, Aztec Code

Stacked Symbologies: PDF417, Micro PDF417,

GS1 Databar (Composite & Stacked)

Linear Barcodes: Code 39, Code 128, BC 412,

I2 of 5, UPC/EAN, Codabar, Code 93,

Pharmacode, PLANET, PostNet, Japanese Post,

Australian Post, Royal Mail, Intelligent Mail, KIX

READ PARAMETERS

Pitch: ±30° Skew: ±30° Tilt: 360°

Decode Rate: Up to 10 decodes per second

CONNECTOR

Type: 3 ft. cable terminated with High Density

15-pin D-Sub socket or USB type A connector

INDICATORS

LEDS: Read Performance, Power, Read Status

Green Flash: Good read

Blue V: Symbol locator

Beeper: Good read, match/mismatch, noread,

serial command conrmation, on/off

COMMUNICATION PROTOCOLS

Standard Interface: RS-232, RS-422 or USB

SAFETY CERTIFICATIONS DESIGNED FOR

FCC, UL/cUL, CE, CB

ELECTRICAL

Power: 5 VDC +/– 5 %, 200 mV p-p max. ripple,

394 mA @ 5 VDC (typ.)

DISCRETE I/O

Trigger Input: 5 to 28V rated (0.16 mA)

New Master: 5 to 28V rated (0.16 mA)

Outputs (1, 2, 3): 5V TTL compatible, can sink 10 mA

and source 10 mA

ROHS/WEEE COMPLIANT

ISO CERTIFICATION

Certied ISO 9001:2008 Quality Management System

Microscan Systems, Inc. SP076B-DE-1013

Read Range and other performance data is determined using high quality

Grade A symbols per ISO/IEC 15415 and ISO/IEC 15416 in a 25° C

environment. For application-specic Read Range results, testing should be

performed with symbols used in the actual application. Microscan Applica-

tions Engineering is available to assist with evaluations. Results may vary

depending on symbol quality. Warranty–For current warranty information on

this product, please visit www.microscan.com/warranty.

Front

*Height is 75% of width.

Note: Specications subject to change. Contact Microscan for updated graphs.

2X M2x0.4

.16” (4.06 mm) depth

Base

HOST CONNECTOR/PIN ASSIGNMENTS

High Density 15 Pin D-Sub Socket Connector

a. Can sink 10 mA and source 10 mA.

b. The default is activated by connecting pin 8 to ground pin 4.

c. Chassis ground: Used to connect chassis body to earth

ground only. Not to be used as power or signal return.

READ RANGES (GRAPHS AND TABLES)

Pin Host Host/Aux Host In/

No. RS-232 RS-232 RS-422/485 Out

1 Power +5 VDC In

2 TxD TxD TxD(–) Out

3 RxD RxD RxD(–) In

4 Power/Signal Ground

5 NC

6 RTS Aux TxD TxD(+) Out

7 Output 1 TTL

Out

8 Default conguration

9 Trigger In

10 CTS Aux RxD RxD (+) In

11 Output 3 TTL

Out

12 New Master (NPN) In

13 Chassis ground

14 Output 2 TTL

Out

15 NC

Microscan Systems Inc.

Tel 425 226 5700 / 800 251 7711

Fax 425 226 8250

Microscan Europe

Tel 31 172 423360 / Fax 31 172 423366

Microscan Asia Paciﬁc

Tel 65 6846 1214 / Fax 65 6846 4641

www.microscan.com

Product Information: [email protected]

Technical Support: [email protected]

Narrow-bar-width Field of View (width)* Read Range

1D 2D

(maximum)

Standard Density

.0075” (0.19 mm) .010” (0.25 mm) 2.4” (61 mm) 2 to 4.0” (51 mm to 102 mm)

.010” (0.25 mm) .015” (0.38 mm) 2.6” (66 mm) 1.7 to 4.7” (43 mm to 119 mm)

.015” (0.38 mm) .020” (0.51 mm) 2.8” (71 mm) 1.4 to 5.2” (36 mm to 132 mm)

Low Density

.010” (0.25 mm) .015” (0.38 mm) 4.2” (107 mm) 3.5 to 4.5” (89 mm to 114 mm)

.015” (0.38 mm) .020” (0.51 mm) 4.5” (114 mm) 2.7 to 5.0” (69 mm to 127 mm)

.020” (0.51 mm) .030” (0.76 mm) 5.5” (140 mm) 2.0 to 6.0” (51 mm to 152 mm)

Note: Nominal dimensions shown. Typical

tolerances apply.

1 2

Commentaires sur ces manuels

Pas de commentaire

Microscan MS-4X Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de codes-barres Microscan MS-4X