Microscan HE45T Manuel d'utilisateur télécharger pdf (Page 38)

Chapter 1 Getting Started

1-28 HawkEye™ 45T User Manual Rev 2.0.0, Jan 2009

• Wakes from sleep mode

• Reads another code

Bluetooth Radio — Auto Connect & Auto Disconnect

After coming out of sleep mode or after powering up (you need to save the

connection), the HE45T tries to auto connect with the last Bluetooth radio it was

connected with. You may always connect by scanning a QuickConnect code.

Scan the codes in Figure 1–33 to enable/disable the Auto Connect feature for the

Bluetooth radio:

FIGURE 1–33. Bluetooth Radio Auto Connect & Disconnect Codes

The Auto Disconnect feature is used when multiple HE45T readers are

connecting to the same Bluetooth Radio. By enabling Auto Disconnect, the

HE45T radio disconnects after each data transmission, allowing other radios to

connect.

Scan the codes in Figure 1–34 to enable/disable the Auto Disconnect feature for

the Bluetooth radio:

FIGURE 1–34. Bluetooth Radio Auto Disconnect On/Off Codes

Note: Auto Connect should always be set to “On” if Auto Disconnect is set to

“On”. (Otherwise the QuickConnect code would need to be re-scanned after

every disconnect).

Bluetooth Radio Auto

Connect On (Default)

Bluetooth Radio Auto

Connect Off

Bluetooth Radio

Auto Disconnect On

Bluetooth Radio

Auto Disconnect Off (Default)

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 101 102

Pas de commentaire

Microscan HE45T Manuel d'utilisateur Page 38