Microscan MS-4X Manuel d'utilisateur télécharger pdf (Page 37)

MS-Connect 210 User’s Manual 2-9

Using Ethernet

Configuring the Ethernet Port

The MS-Connect 210’s Ethernet Port behaves as an EtherNet/IP or TCP server device

capable of communicating with one or more serial devices. The port is identified as an

EtherNet/IP communication adapter. The interface is designed to support remote serial

transmit and receive using Explicit and I/O messaging. The port converts EtherNet/IP

communication from TCP/IP and UDP to the serial interface.

The Ethernet Port has the following features:

• Supports one EtherNet/IP I/O connection and two EtherNet/IP TCP connections.

• Serial buffer status updated on the I/O connection.

• Serial master command-response handling with one request.

• Packing parameters available in each read request.

• Serial-configurable and Telnet-configurable.

• Internal TFTP server to upload new firmware.

• Supports BOOTP.

Configurable Ethernet Port Parameters

The Ethernet Port is both serially configurable and Telnet-configurable. The configurable

parameters are:

Network

• IP Address

•Network Mask

• Gateway IP Address

Serial

• Interface (RS-232 or RS-422/485 4-wire and 2-wire)

• Baud Rate

• Data Format (Data Bits, Parity, Stop Bits)

• Flow Control

Serial operation is controlled by parameters of the serial “read” and “write” commands.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 67 68

Pas de commentaire

Microscan MS-4X Manuel d'utilisateur Page 37